posted by | No comments

Large Multi-Story Office Refit

Aircare has been awarded the contract for the design and installation of a large heating and cooling multi / VRV type system serving a large three story office development in Co Durham.

The clients required an ultra-reliable system, low energy use and minimum installation time.

The equipment Aircare selected are Hyper Inverter heat pumps manufactured by Mitsubishi HI (Europe), these units satisfied all of the client requirements for energy efficiency, capital cost, installation times and occupant comfort.

The systems comprise of 28 in-ceiling cassettes per floor with the associated outdoor heat pump units and services.

Aircare is providing all of the design work, equipment and services, project management, testing and commissioning.  The project is due for completion during July 2016.

 

 

 

 

 

posted by | No comments

Louise Sharp has successfully completed her Environmental Engineering Technologies and F-Gas Certification Training courses.

Louise, who has been at Aircare for the past twelve years and Aircare’s General Manager for the past ten years, has been on a career development programme sponsored by Aircare and attended Polar Training to complete her studies, assessments and exams during April this year.

Louise is now certified to inspect and advise on HVAC and Refrigeration Systems, Energy Saving Solutions and is certified with current F-Gas Legislation.

Wates Testimonial

Mar
2016
17

posted by | No comments

 

“Once again I feel I need to give feedback on (your employee) for the work he carries out. He is an absolute credit to Aircare and is exceptionally professional, discreet in the working environment and safety focused.

Can’t praise him enough. He makes my job so much easier; I really wish all the sub-contractors I dealt with were the same”.

posted by | No comments

 

Listed Historical Victorian Building

Aircare has been awarded the contract for the design and installation of a large heating and cooling system serving open plan and individual offices.

The client requires an ultra-reliable system with low energy use, high occupant comfort, and the system must be acceptable for the historical listed status of the building.

Aircare has designed an air source heating and cooling heat pump VRV multi type system and selected Mitsubishi HI equipment to provide the highest energy efficiency ratings of A+A, and provided an extended warranty and maintenance agreement for “client piece of mind”.

Aircare is providing all of the design work, equipment and services, project management, testing and commissioning.  The project is due for completion March 2016.

posted by | No comments

 

Controlled Environment Print Room

Aircare has been awarded the contract for the design and installation of a controlled environment room, the room is to be used for the manufacture of specialist printing equipment.

The client requires a controlled environment of 21°C, 50%RH and draft free air distribution.

The specialist system shall incorporate an air handling unit, cooling unit, humidifier, low velocity / low level air displacement units and associated services.

Aircare is providing the design work, cooling equipment and services, testing and commissioning.  The project is due for completion April 2016.

posted by | No comments

 

All of the staff at Aircare wish our customers and clients “A Very Merry Christmas and Happy New Year for 2016”.  We would also like to thank all of our clients and customers for their continued support throughout 2015.

Our offices shall be closed from Wednesday afternoon the 23rd December and shall reopen Monday the 4th January 2015.  Emergency cover for FM and maintenance will continue as usual with the out of hours contact numbers.

posted by | No comments

Aircare has been awarded the contract for the design and installation of a controlled environment room, the room is to be used for the manufacture and assembly of aerospace components and instruments.

The client requires a controlled environment of 21Deg C, 50%RH and filtration to ISO 7 / Class 10,000 standard.

These specialist systems shall incorporate air handling units, cooling and heating units, humidifiers, HEPA filters and all associated air distribution ductwork, mechanical and electrical services.

Aircare is providing all of the design work, equipment and services, project management, testing and commissioning.  The project is due for completion January 2016

posted by | No comments

The client required replacement of their main comfort cooling 350kW water chiller, and all of the works needed to be completed within a 36 hour weekend window.

The project was completed ahead of schedule and to the clients satisfaction.

Graduation Day 2015

Jul
2015
20

posted by | No comments

 

Samantha Cherry BSc (Hons). receives her Bachelor of Science Degree at Newcastle University’s graduation ceremony on the 14th July 2015.

Louise Sharp (Aircare’s General Manager) congratulates Samantha on her achievement and commented “Samantha’s Degree is well deserved as she has worked very hard over the past several years”.

Samantha has worked for Aircare part time for the past few years and intends to focus her future career working in the animal sciences and welfare sectors.

posted by | No comments

 

” I would like to say a thank you on behalf of Penn Elcom as your engineers have done a really good job and I have to say it’s not the first time you have done a really good job.”

Dominic Slater
Purchasing Assistant

 

Customer Testimonials